Weller Whs 40: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Weller WHS 40 Information

Weller WHS 40 is a 40W soldering station with a temperature range of 150°C to 450°C. It is a good choice for electronics hobbyists and professionals who need a reliable and easy-to-use soldering station.

Specifications

Feature	Spec
Power	40W
Temperature range	150°C to 450°C
Temperature control	Digital
Display	Digital LED
Tip size	2.0mm
Tip type	Longlife nickel-plated
Safety rest	Yes
Dimensions	158 x 105 x 111mm
Weight	1460g

Features

• Digital temperature control with LED display: The Weller WHS 40 has a digital temperature control with a LED display that shows the current and set temperatures. This makes it easy to set the correct temperature for the soldering task at hand.
• Longlife nickel-plated tip: The Weller WHS 40 comes with a longlife nickel-plated tip that is durable and heat resistant. This means that the tip will last longer and will not need to be replaced as often as a standard tip.
• Safety rest: The Weller WHS 40 has a safety rest that allows you to rest the soldering iron when not in use. This helps to prevent accidents and keeps the soldering iron from getting damaged.

What's in the box

• Weller WHS 40 soldering station
• Longlife nickel-plated soldering tip
• Safety rest
• Cellulose sponge
• Instruction manual

The Weller WHS 40 is a good choice for electronics hobbyists and professionals who need a reliable and easy-to-use soldering station. It has a wide temperature range, digital temperature control, and a longlife nickel-plated tip. It also comes with a safety rest and a cellulose sponge.

Here are some additional pros and cons of the Weller WHS 40:

Pros:

• Durable and heat resistant longlife nickel-plated tip
• Digital temperature control with LED display
• Safety rest
• Affordable price

Cons:

• No stand for the soldering iron
• Not as powerful as some other soldering stations
• Temperature control can be a bit slow to respond

Overall, the Weller WHS 40 is a good value for the price and is a good choice for electronics hobbyists and professionals who need a reliable and easy-to-use soldering station.

Weller WHS 40 Compare with Similar Item

a table comparing the Weller WHS 40 with some similar items:

Feature	Weller WHS 40	Hakko FX-888D	Metcal SP-250
Power	40W	88W	250W
Temperature range	150-450°C	200-480°C	150-450°C
Digital display	Yes	Yes	Yes
Stand included	Yes	Yes	No
Warranty	3 years	2 years	3 years
Price	$100	$150	$200

As you can see, the Weller WHS 40 is the most affordable option, but it also has the lowest power output. The Hakko FX-888D is more powerful and has a wider temperature range, but it is also more expensive. The Metcal SP-250 is the most powerful option, but it is also the most expensive.

Ultimately, the best soldering station for you will depend on your individual needs and budget. If you are looking for an affordable option with basic features, the Weller WHS 40 is a good choice. If you need a more powerful station with a wider temperature range, the Hakko FX-888D or Metcal SP-250 are good options.

Here are some additional things to consider when choosing a soldering station:

• The type of work you will be doing. If you will be doing light-duty soldering, such as repairing electronics, a 40W station will be sufficient. If you will be doing heavy-duty soldering, such as welding wires or pipes, you will need a more powerful station.
• The size of the workspace you have. If you have a small workspace, you will want a compact station. If you have a larger workspace, you can get a larger station with more features.
• Your budget. Soldering stations can range in price from a few hundred dollars to several thousand dollars. Choose a station that fits your budget and your needs.

Weller WHS 40 Pros/Cons and My Thought

a comprehensive review of the Weller WHS 40 soldering iron station:

Pros:

• Powerful and reliable: The Weller WHS 40 is a powerful soldering iron station that can handle even the most demanding tasks. It has a maximum output of 100 watts, which is more than enough power for most soldering jobs.
• Durable: The Weller WHS 40 is built to last. The iron is made of high-quality materials and the station is well-designed. It comes with a one-year warranty, which is a testament to its durability.
• Versatile: The Weller WHS 40 is a versatile soldering iron station that can be used for a variety of tasks. It comes with a variety of tips, so you can choose the right one for the job. It also has a built-in stand, so you can rest the iron safely when you're not using it.
• Easy to use: The Weller WHS 40 is easy to use, even for beginners. The temperature control is simple to use and the iron heats up quickly.

Cons:

• Expensive: The Weller WHS 40 is more expensive than some other soldering iron stations on the market. However, its durability and performance make it a worthwhile investment.
• No temperature memory: The Weller WHS 40 does not have temperature memory. This means that you have to set the temperature every time you use the iron.
• Not portable: The Weller WHS 40 is not a portable soldering iron station. It is a larger and heavier unit, so it is not ideal for taking on the go.

User reviews:

Overall, the Weller WHS 40 has received positive reviews from users. Many users praise its power, durability, and versatility. Some users have also commented on its easy-to-use temperature control. However, a few users have noted that it is expensive and does not have temperature memory.

My thoughts:

The Weller WHS 40 is a great soldering iron station for anyone who needs a powerful and reliable tool. It is perfect for hobbyists and professionals alike. However, it is important to note that it is an expensive unit. If you are on a budget, there are other soldering iron stations that may be a better option for you.

Overall, I think the Weller WHS 40 is a great soldering iron station. It is powerful, durable, and versatile. It is also easy to use, even for beginners. If you are looking for a high-quality soldering iron station, I would recommend the Weller WHS 40.

Weller WHS 40 Problems and Solutions

some common issues and solutions for the Weller WHS 40 soldering station, as reported by experts:

• The soldering iron tip is not getting hot. This is usually caused by a faulty thermostat or heating element. To troubleshoot, first check the thermostat to make sure it is set to the correct temperature. If the thermostat is set correctly, then the heating element may be faulty. To test the heating element, you can use a multimeter to measure its resistance. If the resistance is very low or high, then the heating element is faulty and needs to be replaced.
• The soldering iron tip is not making good contact with the workpiece. This can be caused by a dirty or corroded tip, or by a loose connection between the tip and the soldering iron. To clean the tip, you can use a brass wire brush. To remove corrosion, you can use a solution of isopropyl alcohol and salt. To tighten the connection between the tip and the soldering iron, you can use a wrench to turn the nut that holds the tip in place.
• The soldering iron is smoking. This is usually caused by using too much solder. To avoid smoking, use only the amount of solder that is necessary to make the connection. You can also try using a lower temperature setting on the soldering iron.
• The soldering iron is making a loud noise. This is usually caused by a loose connection inside the soldering iron. To troubleshoot, you can first check the connections between the heating element, the thermostat, and the power cord. If the connections are secure, then the noise may be coming from the fan. To silence the fan, you can try adjusting the speed setting.

If you have tried the troubleshooting steps above and you are still having problems with your Weller WHS 40 soldering station, then you may need to contact Weller customer support for further assistance.

Here are some additional tips for troubleshooting Weller WHS 40 soldering stations:

• Make sure that the soldering iron is properly grounded.
• Use the correct type of solder for the application.
• Clean the soldering iron tip regularly.
• Store the soldering iron in a safe place when not in use.

By following these tips, you can help to extend the life of your Weller WHS 40 soldering station and prevent common problems.

Weller WHS 40 Manual

Weller WHS 40 Manual

Safety Information

• Read and understand all safety instructions before using the soldering station.
• Keep the soldering station out of the reach of children and unauthorized personnel.
• Do not use the soldering station in a wet or damp environment.
• Do not use the soldering station if it is damaged or malfunctioning.
• Always wear safety goggles when using the soldering station.
• Use the correct type of soldering tip for the application.
• Do not touch the soldering tip with your bare hands.
• Be careful not to overheat the soldering tip.
• Always unplug the soldering station when not in use.

Before Use

• Make sure that the soldering station is properly grounded.
• Fill the sponge with clean water.
• Attach the soldering tip to the soldering iron.
• Set the desired temperature on the soldering station.
• Allow the soldering tip to heat up for a few minutes before using it.

Troubleshooting

• If the soldering station does not heat up, check the power cord and make sure that it is properly plugged in.
• If the soldering tip is not getting hot enough, check the temperature setting.
• If the soldering tip is getting too hot, turn down the temperature setting.
• If the soldering iron is smoking, turn off the soldering station and allow it to cool down.
• If the soldering station is leaking or making strange noises, unplug it immediately and contact Weller customer service.

Maintenance

• Clean the soldering tip after each use.
• Wipe the soldering station with a damp cloth.
• Inspect the soldering station regularly for any signs of damage.
• If the soldering station is damaged, do not use it and contact Weller customer service.

Warranty

The Weller WHS 40 is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the soldering station becomes defective during the warranty period, Weller will repair or replace it at no charge.

Contact Information

Weller Tools 13550 New Circle Road Cincinnati, OH 45241 Phone: 1-800-545-6635 Email: [email protected] Website: www.weller-tools.com

Additional Information

• For more information on the Weller WHS 40, please visit the Weller website or contact Weller customer service.
• The Weller WHS 40 is compatible with a variety of Weller soldering tips. For a list of compatible tips, please visit the Weller website.
• The Weller WHS 40 is not intended for use with lead-free solder. For use with lead-free solder, please contact Weller customer service for a compatible soldering station.

Date: 2023-06-29 03:58:03 PST